Paramount Fitness Clear 03, Installation Manual, Page: 21 / 28

TROUBLESHOOTING & SERVICE
21
For technical assistance call 1.800.621.5886 or contact your regional representative
ISSUE SOLUTION
1. No air bubbles Clean filter then adjust
entering system or pool airflow needle valve.
2. Filter empties and Replace check valve
pump loses prime fitting at strainer pot.
3. Light bulb does not light Check power to Clear
O3
®
, then replace bulb.
at the breaker and remove the unit from
wall mounting.
2.
With a Phillips screwdriver, remove the
three (3) screws in the left end side cap,
labeled electrical connections.
(Fig. 31)
3.
Remove side cap by pulling out from the
end of the unit.
4.
Inside the open electrical housing, find
the light bulb plug and pull it out about
one inch.
(Fig. 32)
CONVERTING BALLAST VOLTAGE TO ALTERNATE
SETTING
Fig. 31
Fig. 32