Paramount 755T/785T Owner’s Manual
66
Install Deck
After replacing the walking belt follow these steps to
reinstall or replace the deck.
1.
Check deck surface.
Look at the deck surface, make
sure that the surface is clean and still has a shiny fin-
ish. Note: If you are installing a new belt, the deck
must be “flipped” to a new unused surface or a new
deck must be installed.
2.
Clean the deck.
Wipe the deck with a soft, dry cloth.
3.
Position the deck on the right side of the treadmill
with the walking belt over the inside edge.
4.
Use a nylon strap clamp to position the deck.
Wrap
the nylon strap around the deck and top half of the
belt. Lift using the nylon strap to position the deck.
5.
Secure the deck.
Insert and tighten the four deck
screws.
