background image

4

 

• 

Be familiar with all controls and proper operation. Know how to stop the 
machine quickly. 

• 

Never allow children to operate this machine. All users must read and 
understand instructions and safety rules in this manual. 

• 

Many accidents occur when more than one person operates the machine. If a 
helper is assisting in loading logs, never activate the control until the helper is 
minimum of 10 feet from the machine. 

• 

Keep bystanders, helpers, pets, and children at least 20 feet from the machine 
while it is in operation. 

• 

Never allow anyone to ride on this machine 

• 

Never transport cargo on this machine.                      

• 

Hydraulic log splitters develop high fluid pressures during operation. Fluid 
escaping through a pin hole opening can penetrate your skin and cause blood 
poisoning,   gangrene, or death. Pay attention to the following instructions at all 
times:

 

a.  Do not check for leaks with your hand.                           

 

b.  Do not operate machine with frayed, kinked, cracked, or damaged hoses,  

 

     fitting, or tubing.   

 

c.  Stop the engine and relieve hydraulic system pressure before changing or  

      

     adjusting fittings, hoses, tubing, or other system components.                           

 

d.  Do not adjust the pressure settings of the pump or valve.

                       

• 

Leaks can be detected by passing cardboard or wood, (while wearing protective 
gloves and safety glasses) over the suspected area. Look for discoloration of 
cardboard or wood.        

• 

If injured by escaping fluid, see a doctor immediately. Serious infection 
or reaction can develop if proper medical treatment is not administered 
immediately.                            

• 

Keep the operator zone and adjacent area clear for safe, secure footing. 

• 

If your machine is equipped with an internal combustion engine and it is 
intended for use near any unimproved forest, brush, or grass covered land, the 
engine exhaust  should be equipped with a spark arrester. Make sure you comply 
with applicable local, state, and federal codes. Take appropriate firefighting 
equipment with you. 

• 

This machine should be used for splitting wood only, do not use it for any other 
purpose.

LOG SPLITTER

Summary of Contents for LS42I




























Reviews: