31
●
Use options after confirming that the combination of options is correct. Using the bed with the
wrong combination of options could result in injury or could damage the products. The part number of
each option is written on the safety label and on the carton box.
●
Do not use options other than those specified in this instruction manual. This may create
unintended gaps or may damage or deform the product, resulting in injury.
●
Make sure that there is nothing in the option attachment holes, when mounting the options. If there
are obstacles in the option attachment holes, you cannot mount the options, and the patient may fall
off the bed or get caught in the gap, resulting in injury.
●
The right foot rest and the left foot rest are different. Be careful not to attach wrongly.
●
The description in this instruction manual may differ from the actual product due to
specification changes. For any queries, please feel free to contact your dealer.
1. Foot rest (PC-5051, PC-5054, PC-5064)
■
The foot rest can be used during delivery.
●
Be careful not to allow any part of the body to enter the gap between the foot rest and the mattress
base, or hand grip. When any part of the body enters the gap, the patient might not be able to
withdraw, and there is a risk of injury. Detach the foot rests except when giving birth.
●
Make sure that the lever is tightened firmly. Otherwise, the foot rest may move, causing an injury.
①
Direct outward the planar section of the mounting section of the foot rest, and insert the mounting
section into the option attachment hole as shown in the figure.
②
Turn the lever to fasten the foot rest.
③
Lightly pull the foot rest and make sure that it is fastened.
Mounting section
Option attachment hole
This foot rest is designed to be attached to the bed for for supporting body of patient during delivery.
Loosen
Tighten
Lever
(PC-5054)
(PC-5064)
(PC-5051)
(PC-5051)
Main frame side label
Mattress side label
