Distance between the radar surface and the object you are trying to detect
approaching from the right.
Note: If you get inaccurate measurement data, check the accuracy of the distance
settings .
see more instruction: Measure distance to lanes
Autotune
Turn on autotune to allow the radar to adjust the sensitivity.
If the sensitivity is to high, the object might blur and therefore gets too big (Size
value) If the distance is incorrect the size get too big too.
With Autotune enabled the Radar Sensitivity will be controlled automatically. It’s
comparable to the automatic exposure setting at a photo camera.
LoRaWAN Settings
LoRa Modem Enabled
LoRa Modem on by default
Uplink Internval (10min)
Time span of the counts that are sent
Device Class
Class A Device:
Class B Device:
Class C Device:
Confirmed Uplinks
ON:
OFF:
ADR Enabled
ON:
