OFF:
RTC Timesync Enabled
ON:
OFF:
Operation Mode (mode)
TCR can be operated in 3 different modes.
Mode
Description
Used for
Timespan
Device is counting during a certain
time interval
(see
lora_interval
setting). After the
time is up, counter values are
transmitted.
Default behavior.
This can be used
for creating
histograms or
controlling actors
like street lights.
NotZero
Same as Timespan but uplinks are
blocked as long as there is no
movement.
This can be used to
save uplinks or
energy.
Trigger
This will send an uplink as soon as
an object has been detected
This can be used
for alam
applications.
Note: Trigger mode is limited by the LoRaWAN® standard. It is not possible to
transfer as many times and in arbitrarily short intervals. (See ETSI Duty Cycle for
more information)
Hold-Off Timer (holdoff)
This function is used to filter fast consecutive counts.
As an example, if Hold-off time is set to 10 seconds, no second count will occur for
10s after a first count.
This function is useful in situation where you want to count a queue of objects e.g.
count the train and not the waggons.
Value range:
1-600s
(0 = no filter applied)
