Copyright © Parallax Inc.
SF11 ELEV-8 Mount Kit (725-28925)
v1.0 4/6/2016 Page 2 of 3
Assembly Instructions
Step 1: Align the mounting bracket on the back (or side) of the top face of the Bottom Chassis Plate on
your ELEV-8 v3 Quadcopter as shown below.
Step 2: Attach the mounting bracket to the Bottom Chassis Plate using the two #4-40 x ½” socket-head
cap screws and #4-40 nylon-insert locknuts, and tighten with the 3/32” hex key and wrench.
Step 3: Insert the SF11 laser rangefinder (as shown below) into the figure-8 shaped opening. Secure
with two #4-40 x 1/4” long, socket-head screws using the 3/32” hex key. Do not overtighten. If available,
we recommend you place a small drop of medium-strength thread-locking fluid onto each screw first.
