Parallax ELEV-8 Y-6, Information And Assembly Manual

Page: 26 / 32

Step 15: Reprogram the Control Board Firmware for Y-6
In this step you will program the Control Board to know it is in a Y-6 configuration.
1. If you have not done so already, go to the website listed here and download the Hoverfly Firmware Update Client:
http://www.hoverflytech.com/Software_Updates.html
2. Once you have the software installed and opened, connect your Control Board to your PC. Follow the onscreen instructions to update your
board’s firmware for the Y-6 configuration.
3. Be sure to set Select Board to Hoverfly Open, and Select Mode to Y6.
Copyright © Parallax Inc. ELEV-8 Y-6 Multicopter Kit (#80100) Version 1.0 Page 26 of 31