Parallax ELEV-8 Y-6, Information And Assembly Manual

Page: 7 / 32

6. If necessary, use wire strippers to expose
1/8 inch (0.3 cm) of metal on the end of
each speed controllers’ blue wire leads.
7. Solder an opposite-gender EC3 connector to
the end of each speed controllers’ blue leads.
8. Connect the male EC3 connectors to the
female EC3 connectors of your speed
controller, to verify that they fit properly.
9. Disconnect them again for now.
Copyright © Parallax Inc. ELEV-8 Y-6 Multicopter Kit (#80100) Version 1.0 Page 7 of 31