Parallax ELEV-8 Y-6, Information And Assembly Manual

Page: 20 / 32

Step 11: Configure your Transmitter
1. For best results, follow the Transmitter Setting Recommendations in the table
below to configure your Transmitter.
2. Refer to the diagram below to see how your Transmitter’s 2-axis joystick controls
will translate into ELEV-8 Y-6 Multicopter motion with these settings.
Transmitter Setting Recommendations
Box Model Type ACRO (Plane Mode)
End point
adjustment
Set to 50% initially. (If the ELEV-8 still seems too
reactive, reduce to 30% until you get used to flying it.)
Dual-Rates
(D/R)
100%
Channel
Reverse Normal: Hi Tech Spektrum, JR brands
Reversed: Futaba brand
Trims Centered
Sub-trims Centered
Gain Adjust
Set Gain on 5
th
channel. Start with 25%, add or
subtract based on flight stability
Exponential
After gaining experience, add up to 30% into aileron
and elevator
Transmitter
Throttle
Aileron
Elevator
Rudder
Copyright © Parallax Inc. ELEV-8 Y-6 Multicopter Kit (#80100) Version 1.0 Page 20 of 31