Copyright © Parallax Inc.
PING))) Kit for Stingray (#28985) 12/8/2009
Page 3 of 7
Step 3: Connecting Cable
Connect a10” extension cables to the
PING))) sensor. The pins on the module
should be connected to the cable as
followed:
Black connects to GND
Red connect to 5V
White connects to SIG
Place a rubber grommet in the circular area
of plate and insert the connection cable
through the grommet.
If in step 4 you chose to install the PING)))
in a different orientation, it is suggested that
the grommet be still used to protect the
cable from getting damaged.
Step 4: PING))) Sensor Assembly
Place the nylon spacers as pictured to align
the PING))) sensor. It is possible to install
the sensors in various places on the plate,
the middle was chosen for versatility;
however if the PING))) sensors are installed
to close to a surface, they are likely to
encounter false echoes.
