Maintenance
Replace cartridge when capacity is reached or when flow becomes too slow. About replace once every 12
months.
Filter lasts up to 12 months dependent upon filter system, water quality and amount of water filtered.
Replace about every 2,500 gallons or every 12 months, whichever comes first.
Cartridge Change Procedure:
1. Turn off the cold water shut-off valve or not. Turn the cartridge clockwise until it releases. Gently pull
down on the used cartridge to remove it from the system head. Discard the used cartridges.
Note:
Place a pan or bucket under the filter system to catch any water drips.
2. Hold the new filter cartridge with the label facing to the left slightly. The two nozzles on top of the filter
should be toward the back of the filter. Lift the filter straight up into the system head until the two nozzles
seat into the ports and the two extended flanges on top of the filter are fully engaged into the system
head.
3. Turn the Filter cartridge counter-clockwise until it stops.
4. Turn on the cold water shut-off valve and the faucet for filtered water and check for any leaks. Note the
replacement date.
5. Run water through faucet for 10 minutes to flush out any air and carbon fines from the filter. Check for
leaks once more before completion.
Summary of Contents for PW2000F
Page 4: ......
