Step 6:
Install the twist off filters. Lift the twist off filter straight up into the system head until the two
nozzles seat into the ports and the two extended flanges on top of the twist off filter are fully engaged into
the system head. Turn the twist off filter counter-clockwise until it stops.
Step 7:
Test the filter system for proper operation. Turn on the cold water shut-off valve under the sink.
Turn on the new faucet for filtered water. In order for the filter system to flush out any air and carbon fines
(fine black powder) from the twist off filter, allow the water to run for approximately 10 minutes. Check
the connections to be sure there are no leaks.
Note:
For the first time use, please be sure to run water for at least 10 minutes. When system is not in use
for several days, please run water for more than 3 minutes to make sure the machine provides fresh water.
After installation, record the installation date for future reference.
Summary of Contents for PW2000F
Page 4: ......
