background image

SAFETY PRECAUTIONS 

Paragon values your continued safety above all else. Please follow these guidelines when using your 
equipment to prevent injury and maximize product performance:  

 
 

 

 
 
No direct contact to equipment by the general public should be allowed 
when used in food service locations. Only trained personnel should operate 
this equipment.  Carefully read any and all instructions before beginning 
operation of the equipment. 

 
 

 
 
 
Always wear safety glasses when servicing equipment.  
 

 
 

 
 
Floss head reaches high speeds during operation. To avoid injury, NEVER 
place body parts or objects near the floss head assembly while motor is 
running. 

Please keep spectators away. Paragon is not responsible for any 

injuries that may occur due to failure to follow safety precautions. 

 

 

 

 
 
Any alterations made to equipment by anyone other than certified Paragon 
personnel will void warranty and may also create unsafe working conditions. 
NEVER make alterations to the equipment.  

 

 
 

 
 
Machine must be properly grounded to prevent electrical shock.  
Do NOT immerse any other part of this equipment in water. Doing so may 
damage equipment and prevent it from working properly.  
Always unplug equipment before cleaning or servicing to prevent electric 
shock. 
 
 

Summary of Contents for MAGIC SPIN 5









Reviews: