Paragon G Series Installation And Operation Manual Download Page 15

Warranty

 

 

Subject to the terms and conditions hereinafter set forth in General Terms of Sale, Paragon Tank Truck Equipment LLC (the 

Seller) warrants products and parts of its manufacture, when shipped and its work (including installation and start-up) when 

performed, will be of good quality and will be free from defects in material and workmanship.  This warranty applies only to Seller’s 

equipment, under use and service of products, for a period as stated in the table below.  Due to the varying condition of installation 

and operation, all performance claims are subject to a plus or minus 5% variation. (Non-standard materials are subject to a plus or 

minus 10% variation)

 

 

THIS WARRANTY EXTENDS ONLY TO BUYER AND/OR ORIGINAL END USER, AND IN NO EVENT SHALL 

THE SELLER BE LIABLE FOR THE PROPERTY DAMAGE SUSTAINED BY A PERSON DESIGNED BY THE LAW 

OF ANY JURISDICTION AS A THIRD PARTY BENEFICIARY OF THIS WARRANTY OR ANY OTHER WARRANTY 

HELD TO SURVIVE SELLER’S DISCLAIMER. 

 

All accessories furnished by seller but manufactured by others bear only that manufacturer’s standard warranty. 

 

All claims for defective products, parts, or work under this warranty must be made in writing immediately upon discovery 

and, in any event within one year from the date of the shipment of the applicable item and all claims for defective work must be 

made in writing immediately upon discovery and in any event within one year from date of completion thereof by Seller.  Unless 

done with prior written consent of Seller, any repairs, alterations, or disassembly of Seller’s equipment shall void warranty.  

Installation and transportation costs are not included and defective items must be held for Seller’s inspection and returned to 
Seller’s ex works upon request.

  

 

THERE ARE NO WARRANTIES, EXPRESSED, IMPLIED, OR STATUTORY WHICH EXTEND BEYOND THE 

DESCRIPTION ON THE FACE HEREOF, INCLUDING WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF 

MERCHANTABILITY AND FITNESS OF PURPOSE. 

 

After Buyer’s submission of claim as provided above and its approval, Seller shall either repair or replace its product, part, or 

work at the original ex works point of shipment, or refund an equitable portion of the purchase price. 

 

The products and parts sold hereunder are not warranted for operation with erosive or corrosive materials or those which 

may lead to build up of materials within the product supplied, nor those which are incompatible with the materials of construction.  

The Buyer shall have no claim whatsoever and no product or part shall be deemed to be defective by reason of failure to resist 

erosive or corrosive action nor for problems resulting from build-up of material within the unit nor for problems due to incompatibility 

with the materials of construction.  

 

 

Any improper use, operation beyond capacity, substitute of parts not approved by Seller, or any alteration or repair by others 

in such manner as in Seller’s judgement affects the product materially and adversely shall void this warranty. 

 

No employee or representative of Seller other than an Officer of the Company is authorized to change this warranty in any 

way or grant other warranty.  Any such change by an Officer of the Company must be in writing. 

 

The foregoing is Seller’s only obligation and buyer’s only remedy for breach of warranty, and except for gross negligence, 

willful misconduct and remedies permitted under the General Terms of Sale in the sections on 

CONTRACT PERFORMANCE, 

INSPECTION AND ACCEPTANCE,

 and the 

PATENTS CLAUSE

 hereof, the forgoing

 is 

BUYER’S ONLY REMEDY 

HEREUNDER BY WAY OF BREACH OF CONTRACT TORT OR OTHERWISE, WITHOUT REGARD TO WORK 

WHETHER ANY DEFECT WAS DISCOVERED OR LATENT AT THE TIME OF DELIVERY OF THE PRODUCT OR 

WORK.

  

In no event shall Buyer be entitled to incidental or consequential damages.  Any action for breach of this agreement must 

commence within one year after the cause of action has occurred.  

 

Paragon Tank Truck Equipment LLC

.,  2111 US Hwy 411 NE | Cartersville, Georgia USA 30121 

Tel: 770-387-3820 | Toll: 800-471-8769 | Fax: 770-387-3824 | 

www.paragondirect.com

 | 

[email protected]

 

 

Copyright 2016 Paragon Tank Truck Equipment LLC

Product Type

Warranty Duration

New

18 months from date of shipment, or 12 months after initial startup date, whichever occurs first.

Remanufactured

12 months from date of shipment.

Repair

12 month from date of shipment, or remaining warranty period, whichever occurs first.

Summary of Contents for G Series

















Reviews: