8
September
2004
TIM1-A2-GZ40-00
Attaching the RJ21 Connectors
12000 and 12000E
Procedure
To attach RJ21 connectors to the 12000 or 12000E:
1. Detach the hook and loop fastener strap and pull it open to the right, leaving it
looped under the connector frame on the right side. Slide the RJ21 connector
of your T1 cable underneath the strap and press it firmly into the RJ21
connector on the chassis.
2. Screw the top of the T1 cable connector into the jackscrew at the top of the
RJ21 connector frame on the chassis. If you are using a 120° or 180° cable,
both the top and the bottom of the cable connector should be secured to the
RJ21 connector frame on the chassis.
NOTE: The RJ21 connector cannot be screwed into the connector frame on
the 12000. A T1 connection on the 12000 can only be secured via the hook
and loop fastener strap.