Paradyne Hotwire 7995, Installation Instructions Manual

Page: 9 / 32

9
Displaying Configuration Options
To display configuration options, you must first load a configuration into the edit area. To
load a configuration option set into the configuration edit area, follow this menu selection
sequence:
Main Menu
→
Configuration (Load Configuration From)
Make a selection by placing the cursor at your choice and pressing Enter.
Configuration Edit/Display
The Configuration Edit/Display screen is displayed when the current or default
configuration is loaded. To access the Configuration Edit/Display screen, follow this
menu selection sequence:
Main Menu
→
Configuration
→
Current Configuration
– or –
Main Menu
→
Configuration
→
Default Factory Configuration
If you select . . . Then . . .
Current
Configuration The selected configuration option set is loaded and the
Configuration Edit/Display menu screen appears.
Configuration
Loader The Configuration Loader screen is displayed allowing you to
upload or download configurations from a TFTP server.
Default Factory
Configuration The selected configuration option set is loaded and the
Configuration Edit/Display menu screen appears.
main/config/edit
Model:799x
CONFIGURATION EDIT/DISPLAY
DSL Port
DSL Port Threshold Traps
SYNC Port | G.703
System Options
Communication Port
Management and Communication
-----------------------------------------------------------------------------
Ctrl-a to access these functions, ESC for previous menu MainMenu Exit
Save