28
Model 7996 Switchpack Definitions
Table 14
and
Table 15
list Model 7996 Switchpack definitions.
Table 14. Switchpack S3 Definitions – Model 7996
Switch # . . . Allows you to . . .
Default in Bold
1
Control whether the unit is an STU-C or an STU-R.
OFF = STU-R
ON = STU-C
2
Control enabling of either Fixed Rate or Auto Rate mode. Valid only for
units configured as the STU-C.
OFF = Fixed Rate mode
ON = Auto Rate mode
3, 4, 5
Select one of eight preset DSL line rates. If Auto Rate is enabled, DSL
Line Rate represents the Auto Rate ceiling.
All OFF = 2056 Kbps
6, 7
Not used
8
Emergency Use Only – The unit has two banks of flash memory used
to hold executable firmware. This unit allows you to change between
the two versions of firmware. This switch is independent from the
position of Switch 1 on Switchpack S4 (Switch Enable/Disable).
OFF = Current Firmware
ON = Previous Firmware
Switch Position
DSL Line Rate
Default in Bold
5
4
3
OFF
OFF
OFF
2056 Kbps
OFF
OFF
ON
200 Kbps
OFF
ON
OFF
264 Kbps
OFF
ON
ON
392 Kbps
ON
OFF
OFF
520 Kbps
ON
OFF
ON
776 Kbps
ON
ON
OFF
1032 Kbps
ON
ON
ON
1544 Kbps
Summary of Contents for Hotwire 7995
Page 32: ...7990 A2 GN10 00...
