background image

 11

7985-A2-GZ40-00

March 1999

Table 4.

Communication Port Options (2 of 2)

Disconnect Time (Minutes)

Possible Settings: 1 – 60
Default Setting: 5

Number of minutes of inactivity before the session terminates automatically. Timeout is
based on no keyboard activity.

Disconnect Time (minutes) option appears when Inactivity Timeout is enabled.

Table 5.

Telnet Session Options

Telnet Session

Possible Settings: Enable, Disable
Default Setting: Enable

Specifies if the 7985 Termination Unit will respond to a Telnet session request from a
Telnet client on an interconnected IP network.

Telnet Login Required

Possible Settings: Enable, Disable
Default Setting: Disable

Used to secure access to the ATI through a Telnet session. Login IDs are created with a
password and access level.

Session Access Level

Possible Settings: Administrator, Operator
Default Setting: Administrator

The Telnet session access level is interrelated with the access level of the Login ID.

Inactivity Timeout

Possible Settings: Enable, Disable
Default Setting: Disable

Provides automatic logoff of a Telnet session.

Disconnect Time (Minutes)

Possible Settings: 1 – 60
Default Setting: 5

Number of minutes of inactivity before a Telnet session terminates automatically. Time
out is based on no keyboard activity.

Disconnect Time (minutes) option appears when Inactivity Timeout is enabled.

Summary of Contents for Hotwire 7985

























Reviews: