7
Installing the Hotwire 6301/6302 IDSL Router
Place the IDSL Router on a flat surface with clearance for the rear connectors.
NOTE:
The following illustrations show the Hotwire 6302 IDSL Router with a 4-port
Ethernet hub. The Hotwire 6301 IDSL Router is identical except that it has one
Ethernet port.
For router cable pin assignments, refer to
Cables and Connectors
on page 15.
Procedure
1. Use the supplied RJ11 6-pin cable for the DSL connection. Insert one end of the
cable into the jack labeled DSL. Insert the other end into the wall jack labeled DSL.
2. Use an 8-pin Ethernet cable for the Ethernet connection. Insert one end of the cable
into the jack labeled ETHERNET.
If installing a . . .
Then go to . . .
Hotwire 6301 IDSL Router
Step 3
on page 8
Hotwire 6302 IDSL Router
Step 4
on page 9
00-16759
DSL
Jack
POWER
CONSOLE
DSL
2
1
ETHERNET
3
4
6302 IDSL Router
