5. Monitoring the DSL Router
6371-A2-GB20-20
May 2001
5-3
Interface Status
Current status of the Ethernet (eth1) or DSL (dsl1) interface can be accessed
using the
show interface
CLI command.
Information provided about each interface includes the direction of the link, the
MAC address, Proxy ARP setting, the numbered interfaces, their IP addresses and
subnet masks.
See
show interface {eth1 | dsl1}
on page A-20 in
Appendix A,
Command Line
Interface
, for information about the command and what is displayed when the
command is entered.
NOTE:
The Primary designation of a numbered interface (e.g., eth1:1) marks that
interface as the one that uses its IP address as a Router ID. If no interface is
defined as Primary, the last numbered interface that was created becomes the
Primary IP Address.
Performance Statistics
Performance statistics are available for the DSL and Ethernet interfaces, for IP
processing, and for the bridge using the
show statistics
CLI command.
These statistics are above and beyond what is collected and reported at the
DSLAM.
See
show statistics [ eth1 | dsl1 | ip | bridge ]
on page A-23 of
Appendix A,
Command Line Interface
, for information about the command and what is
displayed when the command is entered.
Clearing Statistics
The CLI allows you to clear a set of statistics, resetting the counts to zero. Refer to
Clearing Statistics Command
in Appendix A,
Command Line Interface
, for
additional information.
Summary of Contents for Hotwire 6301
