Paradyne Hotwire 6301, User Manual

Page: 22 / 126

2. Accessing the DSL Router
2-6
May 2001 6371-A2-GB20-20
Manually Logging Out
To log out, there are two commands:
logout
and
exit
.
Procedure
To log out of a CLI or Telnet session:
1. At the > prompt, type
logout
and press Enter.
2. The system ends the session immediately. Any configuration updates must
be saved before exiting or the updates will be lost.
Procedure
To exit the DSL router’s current access level:
1. At the > prompt, type
exit
and press Enter. If there are any unsaved
configuration changes, you will be prompted to save changes before exiting.
2. The
exit
command has the following effect:
Automatically Logging Out
The DSL router has an automatic timeout feature that logs you out of the system
after five minutes of inactivity. Unsaved configuration input is lost.
To log back in, press Enter at the console to display the
Login>
prompt. The
default for the
autologout
command is enable (appears as
autologout
{enable | disable}
in command line syntax).
When
autologout
is:
„
Enabled, the system inactivity timer is enabled.
„
Disabled, the system inactivity timer is disabled.
If accessing the DSL router . . . Then . . .
At the Local console and logged in at
the Administrator level, configuration
mode You are placed at the Operator level. Any
configuration updates must be saved or
they will be lost.
At the Local console and logged in at
the Administrator level,
non-configuration mode You are placed at the Operator level.
At the Local console and logged in at
the Operator level The
exit
command responds exactly like
the Logout command.
Via a Telnet session and logged in at
any access level Entering either of the following immediately
ends the Telnet session:
„
exit
„
Ctrl + ]
(Control and right bracket keys)