ISDN Adapter Option
6-6
FrameSaver NP 64+ User’s Manual - Installation Guide
980-001-0221C
March
2001
Establish
Management
Session
The FrameSaver NP 64+ sends a Startup/Login Prompt when a management connec-
tion has been established (in-band Telnet, dial-in VT-100 console connection or direct
connected VT-100 terminal), provided that another management session is not current-
ly in use.
Login
The startup display and prompt are:
Only the User access password prompt will be displayed if the System-level password
feature is disabled. If enabled, the System access password prompt will be displayed,
and the User access password prompt will be displayed only after entering a valid
System Password.
At the User access prompt, enter the Configuration or Supervisor Password followed
by ENTER (factory default Configuration Password is “33333333”).
NOTE: Only Configuration or Supervisor-level USER Password will allow configu-
ration changes. View level displays all screens but allows no configuration changes or
testing; and Test level displays all screens, allows performance of tests, but no config-
uration changes.
The next prompt asks for your name and phone number:
Enter name and phone number followed by ENTER. If this information is provided, it
will be displayed to any other operator attempting to Login (via other access port)
while in use, so they may contact you in case they have to gain immediate access.
NOTES:
1. Console session will be terminated and must be reinitiated if there are three invalid
password attempts, or a timeout resulting from no attempt for one minute.
2. If the unit’s NVM has been cleared since the last successful login, this will be
indicated on the Startup screen display as shown below:
FrameSaver NP 64 - Frame Relay Service Unit
(C) Paradyne Corporation 1996-2000.
All Rights Reserved
Base:00.64/09.04.15.03i Opt:00.23/01.25.01
Please enter your SYSTEM access password:
Please enter your USER access password:
Please enter your USER access password:
Please enter your name and phone #:
FrameSaver NP 64 - Frame Relay Service Unit
(C) Paradyne Corporation 1996-2000.
All Rights Reserved
Base:00.64/09.04.15.03i Opt:00.23/01.25.01
System Database Reset to Factory Defaults.
Please enter your USER access password:
