manualshive.com logo in svg

Paradyne COMSPHERE 3825PLUS, User Manual

The Paradyne COMSPHERE 3825PLUS is a reliable and advanced communication system. For easy setup and troubleshooting, we offer a comprehensive Quick Reference Manual available for free download from our website. Get the most out of your product with this handy manual, always accessible at manualshive.com.

Share
Download
background image

E-1

3825-A2-GB30-40

January 1999

CCITT V.25bis Dialing Commands

and Responses

Overview

E-1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Call Request Commands

E-2

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Call Request with Number Provided (CRN)

E-2

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Call Request with Stored Memory Address Provided (CRS

)

E-2

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Call Response

E-2

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Call Failure Indication (CFI)

E-2

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Delayed Call Indication (DLC)

E-2

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Call Connecting (CNX)

E-3

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Call Answer Commands

E-3

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Incoming Call (INC)

E-3

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Disregard Incoming Call (DIC)

E-3

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Connect Incoming Call (CIC)

E-3

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Program Normal (PRN)

E-3

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Request List of Stored Numbers (RLN)

E-3

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

List Stored Number Response (LSN)

E-3

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Command Response

E-4

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Valid (VAL)

E-4

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Invalid (INV)

E-4

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Overview

CCITT V.25bis is an international dialing protocol that

permits direct and stored number dialing using DTEs in
either Asynchronous,bisynchronous, or HDLC operating
mode. The 3825Plus modem supports V.25bis request and
answer commands that initiate and cancel dialing,
program commands that allow you to create and enter
telephone numbers to memory, and list commands that
display all telephone numbers stored in directory
locations. As commands are entered from the DTE, the
3825Plus modem issues a response to the DTE which
indicates if the call failed or connected, or if the command
is valid or invalid.

The following section discusses those V.25bis

commands supported by the 3825Plus modem and the
responses to those commands. 

Tables E-1

 and 

E-2

 in the

Command Response section list the V.25bis command and
response and the analogous AT command.

NOTE

The 3825

Plus modem must be

configured for V.25bis dialing.
Refer to the &M

n or &Qn

commands listed in Chapter 4.

The character format for Asynchronous Dialing mode

is 7 data bits, even parity, and 1 stop bit.

The character format for bisynchronous Dialing mode

is 7 data bits, odd parity, and 1 stop bit.

The character format for HDLC Dialing mode can be

8 data bits, no parity, and 1 stop bit; 7 data bits, odd parity,
and 1 stop bit; or 7 data bits, even parity, and 
1 stop bit.

Character format is determined by the DTE. The

modem detects this format when an AT prefix is entered
from the DTE.

E

Summary of Contents for COMSPHERE 3825PLUS












































































































Reviews:

No comments

Related manuals for COMSPHERE 3825PLUS

Hama 62793 Operating Instruction preview
62793
Brand: Hama Pages: 10
Toshiba V.9256K User Manual preview
V.9256K
Brand: Toshiba Pages: 120
Barnett Engineering B1474 Operation Manual preview
B1474
Brand: Barnett Engineering Pages: 26
Blonder tongue BT-CMTS Series Setup Manual preview
BT-CMTS Series
Brand: Blonder tongue Pages: 20
Terayon ECM 615 Installation Manual preview
ECM 615
Brand: Terayon Pages: 24
TECOM WM5030-OD Mounting Manual preview
WM5030-OD
Brand: TECOM Pages: 17
BroadMax Technology HSA300A-2 Reference Manual preview
HSA300A-2
Brand: BroadMax Technology Pages: 2
Hughes HN9200 Installation Manual preview
HN9200
Brand: Hughes Pages: 132
NETGEAR DM200 User Manual preview
DM200
Brand: NETGEAR Pages: 107
US Robotics 002605-00 - Manual preview
002605-00 -
Brand: US Robotics Pages: 192
RACOM RipEX 1.5 User Manual preview
RipEX 1.5
Brand: RACOM Pages: 159
Tainet T-288C User Manual preview
T-288C
Brand: Tainet Pages: 131
Abocom FM560MX Quick Installation Manual preview
FM560MX
Brand: Abocom Pages: 10
ADTRAN 1200861L1 Quick Start Manual preview
1200861L1
Brand: ADTRAN Pages: 2
ADTRAN 1203153L2 User Manual preview
1203153L2
Brand: ADTRAN Pages: 146
Tainet ITM-3296bis User Manual preview
ITM-3296bis
Brand: Tainet Pages: 131
Zte Velocity USB Stick User Manual preview
Velocity USB Stick
Brand: Zte Pages: 19
Racal-Vadic VA3450P Series Installation & Operation Manual preview
VA3450P Series
Brand: Racal-Vadic Pages: 65

Brands by name

Popular brands

Load more brands