4. Configuration
4-4
January 2004
2600-A2-GN20-10
BitStorm 2600 Startup Procedure
You can initialize your BitStorm 2600 via a PC or terminal connected to the unit’s
CONSOLE port. Then, using a series of CLI commands, GrandVIEW EMS or
another Element Management System, or the web interface, you can configure the
unit according to your requirements.
Login
Procedure
To log in to the BitStorm 2600:
1. Connect a PC or terminal to the CONSOLE port. (See
Console Port
in
Chapter 2,
Cabling
.)
2. At the
login>
prompt, type
admin
and press Enter.
3. At the
password>
prompt, press Enter. The default login password is blank.
4. At the
PDYN>
prompt, type
privilege
and press Enter.
5. At the
password#
prompt, press Enter. The default privileged password is
blank.
You are now logged on and in privileged mode, which allows you to configure the
unit.
Management Modes
The startup procedure for the BitStorm 2600 system differs depending on the type
of management used:
Inband Management – Operates over the uplink.
Out-of-Band Management – Operates over Port 1.
All manuals and user guides at all-guides.com
