4. Configuration
2400-A2-GN20-20
December 2002
4-5
Setting the IP Address
Switch configuration primarily involves setting the IP address and must be set prior
to remote management.
Procedure
To configure the BitStorm 2400 Switch:
1. Select Switch Configuration from the Main Menu, then press Enter.
2. Use decimal dot format to enter the IP Address (for GigE or MGMT interface),
Subnet Mask, and Default Gateways.
3. Select SAVE, then press Enter when finished.
CAUTION:
Do not change MAC address.
Summary of Contents for BitStorm 2461
