Paradyne BitStorm 2461, Installation Manual

Page: 29 / 64

2. Cabling
2400-A2-GN20-20 December 2002
2-9
Power Connection – AC Version
The BitStorm 2400 can be powered by any AC source providing 85 to 265 VAC at
47 to 63 Hz. There is a 2.5A fuse in the outlet, and a spare fuse is also included.
Procedure
To connect the BitStorm 2400 to a power source:
1. Insert the power cord into the designated socket on the back of the unit.
2. If the BitStorm 2400 is in a rack, dress the power cord to the left and fasten it
to the rail with a cable tie.
3. Connect the other end of the power cord to a grounded AC power source.
When power is applied to the BitStorm 2400, it will initiate a self-test. The front
panel Light-Emitting Diodes (LEDs) convey the state of the unit and its interfaces.
See
Chapter 3, LEDs , for more information.
02-17248