6-1
9161-A2-GH30-20
September 1997
Security
6
Creating a Login
A login ID and password is required if security is enabled.*
You can define up to
six logins (login ID/password combinations). Each login must be unique and have
a specified access level.
Procedure
To create a login:
1. Follow this menu selection sequence:
Main Menu
→
Control
→
Admin Login
2. Press Ctrl-a to switch to the screen function key area.
3. Select New and press Return.
4. Enter login ID, password, and security level information.
In the field . . .
Enter the . . .
Login ID
ID of 1 to 10 characters.
Password
Password from 1 to 10 characters.
Re-enter Password
Password again to verify that you entered the
correct password into the device.
Access Level
Access level: 1, 2, or 3.
5. Press Ctrl-a to switch to the screen function key area.
6. To save login information, select Save and press Return.
When Save is complete, Command Complete appears in the message area
at the bottom of the screen. The cursor is repositioned at the Login ID field,
ready for another entry.
*
Security is enabled by the configuration options Login Required for the Communication Port, and Telnet Login
Required or FTP Login Required for a Telnet/FTP Session.
