Paradyne 7520, User Manual, Page: 20 / 76

Using the Asynchronous Terminal Interface
2-8
7520-A2-GB20-20 May 1998
Ending an ATI Session
Use the Exit function key from any screen to terminate the session.
Procedure
To end an ATI session:
1. Press Ctrl-a to go to the screen function key area below the dotted line.
2. Save changes if required. A confirmation message appears if you have made
but not saved changes to your configuration.
3. Tab to Exit (or type e or E) and press Enter. The User Interface Idle screen
appears.