manualshive.com logo in svg

Paradyne 6218, User Manual

Share
Download
Paradyne 6218 User Manual Download Page 46

3. Using the Web Interface

3-22

 

 February 2005

6218-A2-GB20-00

LAN Clients

To add a LAN client, or reserve an IP address for a DHCP client:

Procedure

1. From the Home screen, click on Advanced.

2. Under Advanced, select LAN Clients. If DHCP is used, all DHCP clients are 

automatically assigned. If a fixed IP address server is on the LAN and you 
want this server to be visible via the WAN, you must add its IP address. Once 
the IP address has been added to you can apply Port Forwarding rules to this 
IP address.

3. The Apply button will temporarily save these settings. To make the change 

permanent, click on Tools and select System Commands. On the System 
Commands page, click on Save All.

 

Figure 3-17. LAN Clients

VLAN

You can use the VLAN (Virtual Local Area Network) screen to match different 
VLAN IDs to the LAN ports.

To configure VLANs:

Procedure

1. From the Home screen, click on Advanced.

2. Under Advanced, select VLAN. The VLAN screen appears.

3. Click the appropriate buttons to assign VLAN IDs to the LAN ports.

Summary of Contents for 6218















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands