3. CLI Commands
CLI-A2-GB20-00
October 2004
3-13
ADSL Commands
ADSL is supported on the AAM8000 and AIM24000 interface modules and the
AµD8000 micro DSLAM.
ADSL Encapsulation
ADSL data encapsulation specifies the framing method for carrying traffic over an
ATM network, as defined by RFC 1483.
RFC1438-LLC
An AIM24000 port configured with Logical Link Control (LLC) encapsulation
multiplexes multiple protocols over a single ATM virtual circuit
.
RFC1483-VCM
An AIM24000 port configured with Virtual Circuit Multiplexing (VCM) creates a
separate ATM Virtual Circuit connection for each protocol type, without additional
encapsulation
.
Default: RFC1438-LLC
ADSL Port Mode
Adaptive
A port set to a port mode of Adaptive will automatically train up to the best possible
speed supported by the interface module or micro DSLAM, the ADSL modem at
the remote end, and the copper cable pair connecting the two.
Fixed
A port set to a port mode of Fixed will maintain consistant upstream and
downstream bandwidths as specified by the user.
Fixed Adaptive
A port set to port mode fixed adaptive will automatically train up to the best
possible speed supported by the interface module or micro DSLAM, the ADSL
modem at the remote end, and the copper cable pair connecting the two, within
the confines of user-specified maximum upstream and downstream bandwidths.
Off
A port set to a port mode of Off has been administratively turned off.
[system name] ->SET SLOT [ALL or 1-12 for the IPD12000, ALL or 1-4
for the IPD4000, 1 for the Micro DSLAM] PORT [ALL or port number]
ADSL_ENCAPSULATION [value]
Example: [system name] ->set slot 2 port all adsl_encapsulation
rfc1483-vcm
