manualshive.com logo in svg

Paradox SP5500+, Programming Manual

The Paradox SP5500+ is an innovative security system with advanced features. Enhance your understanding of its programming capabilities and user functionality by accessing the comprehensive Programming Manual. Easily download this valuable manual for free from our website, empowering you to unlock the full potential of your SP5500+ system.

Share
Download
background image

 3

Things You Need to Know

About this Programming Guide

Use this programming guide to record programmed settings for your SP+ Series control panel. This guide should be used along 
with the SP+ Series Reference & Installation Manual (available online), whenever installing or programming your SP+ system.

Conventions

The following typographical conventions are used throughout this guide:

Installer Code

The default installer code is 

0000

.

 

This code allows you to enter programming mode, where you can program all features, options, 

and commands of the control panel, except for user codes. To change this code, see 

System Codes 

on page 27.

Maintenance Code

Similar to the installer code, the maintenance code allows you to enter programming mode and program all sections, except for 
user codes and communication settings (sections 

[395]

, 

[397]

, 

[398]

, 

[815]

, 

[816]

, 

[817]

, 

[910]

, 

[911]

, 

[918]

, 

[919]

, 

[920]

 to 

[927]

, 

[929]

 to 

[935]

,

 [936]

 to 

[942]

,

 [943]

 to 

[949]

) – these sections can only be accessed using the installer code. Since there is no 

default code, see 

System Codes 

on page 27 to set a default.

System Master Code

The default system master code is 

1234

. The system master code allows you to utilize any arming method, as well as program user 

codes. To change the default code, see 

System Codes 

on page 27.

Panel Reset

Performing a panel reset will reset all panel settings to their preset, default values.
1.

Press and hold the panel’s 

RESET

 button until the 

STATUS

 LED flashes (5 seconds). 

2.

Release the 

RESET

 button, and then push it once more, within two seconds.

To reset the panel to its default settings using section programming, see section 

[950]

 in 

Usability Sections

, on page 52.

Entering Programming Mode

To enter programming mode, proceed as follows:
1.

Press

 

ENTER

.

2.

Enter your installer or maintenance code. Upon entering your code, the 

ARM

 and 

STAY

 LEDs will flash. To modify codes, see 

System Codes 

on page 27.

3.

Enter the three-digit section you wish to program. The 

ARM

 and 

STAY

 LEDs remain illuminated.

4.

Enter required data.

 NOTE: 

To enter programming mode, all zones must be disarmed and StayD mode deactivated. To deactivate StayD, press 

OFF

, 

enter your master or user code, and then press 

OFF

.

Data Entry and Display

To access the data display mode, access the desired section and press 

ENTER

 before entering any data. Depending on the keypad(s) 

configured to your system, specific LEDs or icons will flash, thus indicating that you are in data display mode. Each time 

ENTER

 

is 

pressed, the keypad will display the next digit in the current section, and will continue to do so through all the remaining sections, 
one digit at a time, without changing the programmed values; this is not available for sections using the 

multiple feature select 

method.

 Press 

CLEAR

 at any time, to exit data display mode.

There are two methods that can be used to enter data when in programming mode: 

single digit data entry

 and 

feature select 

programming.

Single Digit Data Entry Method

After entering programming mode, some sections will require you to enter decimal values from 000 to 255. Other sections will 
require that you enter hexadecimal values from 0 to F. The required data will be clearly indicated in this guide. When entering the 
final digit in a section, the panel will automatically save and advance to the next section. See 

Decimal and Hexadecimal 

Programming

 for details on the various keys, and their equivalent decimal and hexadecimal values.

Default Settings: Values which appear in bold typeface signify the default value: e.g., 
Access code length: 

6 digits

4 digits

(

4 digits

 is the default value) 

: Installer Quick Menu (indicates that information on the topic can 

also be found in the Installer Quick Menu on page 7)

Section numbers and keypad keys also appear in bold typeface, enclosed by 
brackets: e.g., 

Section

 [706]

 must be enabled...

NOTE: 

Suggestion, important information, or reminder

Summary of Contents for SP5500+





































































Reviews:

No comments

Related manuals for SP5500+

GE INT-22.5R1-24 Operating Instruction preview
INT-22.5R1-24
Brand: GE Pages: 7
Harman Kardon HKTS 5 Specifications preview
HKTS 5
Brand: Harman Kardon Pages: 2
JBL 8340 Specifications preview
8340
Brand: JBL Pages: 2
JBL AVR480 Quick Start Manual preview
AVR480
Brand: JBL Pages: 4
U-Prox KEYFOB User Manual preview
KEYFOB
Brand: U-Prox Pages: 3
Watchguard WGSMSC Quick Start Manual preview
WGSMSC
Brand: Watchguard Pages: 8
Panasonic WV-CP310 Operating Instructions Manual preview
WV-CP310
Brand: Panasonic Pages: 27
i-PRO WV-U1142A Basic Information preview
WV-U1142A
Brand: i-PRO Pages: 17
IDEM SAFETY SWITCHES KL1-P Operating Instructions preview
KL1-P
Brand: IDEM SAFETY SWITCHES Pages: 2
Data Harvest 1156 Manual preview
1156
Brand: Data Harvest Pages: 21
ACTi PMON-1001 Quick Installation Manual preview
PMON-1001
Brand: ACTi Pages: 2
EWM Picomig 305 D2 puls Operating Instructions Manual preview
Picomig 305 D2 puls
Brand: EWM Pages: 84
3M Aqua-Pure 3MFF100 Installation And Operating Instructions Manual preview
Aqua-Pure 3MFF100
Brand: 3M Pages: 8
Optiview Mini Speed Dome Camera Instruction Manual preview
Mini Speed Dome Camera
Brand: Optiview Pages: 31
Olympus Panametrics Epoch 4 Plus User Manual preview
Panametrics Epoch 4 Plus
Brand: Olympus Pages: 188
X-10 REX-10 User Manual preview
REX-10
Brand: X-10 Pages: 18
Ziton ZP7BMR-50 Quick Start Manual preview
ZP7BMR-50
Brand: Ziton Pages: 13
Abus FUSG35000A Quick Start Manual preview
FUSG35000A
Brand: Abus Pages: 2

Brands by name

Popular brands

Load more brands