28
User’s Manual
If the keypad emits a Rejection Beep, you may have chosen an existing
User Code or the Master Code used to modify or create the code does not
have access to the User Options or Area Assignment programmed.
To view the code programmed, instead of entering the User Code
in Step
5, the first number of the code programmed will illuminate. Press the
button and the numbers will illuminate one at a time as you press the
button (the Numerical Symbol
[10]
represents zero).
In Table 1 and Table 2 the User Code Option or Area is considered ON
when the corresponding Numerical Symbol is illuminated. You turn
the Numerical Symbols ON and OFF by pressing the Numerical
Buttons on the keypad.
6) Program the User Options (see Table 1) by turning ON or OFF the
options. Once the options are programmed, press
to reach the
Area Assignment.
The keypad will emit a Half Beep when it switches to Area Assignment.
Pre-existing assignments will illuminate.
7) Program the Area Assignment (see Table 2). Press
to return to
User Options or press
to save and exit.
The keypad will emit a Confirmation Beep to confirm the code’s acceptance.
Summary of Contents for Paradox Digiplex DGP-610
Page 1: ...Digiplex LED Keypads User s Manual...
Page 42: ...Digiplex LED Keypads 43 Figure 8 1 Delayed Fire Zone...
Page 57: ......
