Digiplex LED Keypads 27
5.4 U
SER
A
CCESS
C
ODES
Your system can support up to 63 User Access Codes. All codes are given
a User Number between 02 and 64 (Code 01 is the
System Master Code
).
User Access Codes can be programmed with various options that will
allow you to control the access to your system. Only the
System Master
Code
and codes with the
Master
feature can program User Access Codes
with their User Options and Area Assignment.
How do I program a User Access Code?
1) Enter your
[
ACCESS
CODE
]
System Master Code or User Access Code with the Master feature only.
2) Press
to enter the
User Programming Menu
.
The Area Symbols of the areas assigned to your User Access Code and
the [
PRG
] Symbol will flash.
3) Press the
button.
The Area Symbols of the areas assigned to your User Access Code and the
[
ACCESS
] Symbol will illuminate. The [
PRG
] Symbol will continue to flash.
4) Enter the 2-digit
User Number
(02 to 64) you want to program.
The [
ACCESS
] Symbol will flash for an unused code. If the code is used,
[
PRG
] Symbol and first number of the code will illuminate. The [
ACCESS
]
Symbol and the Area Symbols will extinguish.
5) Enter a User Code. If you do not want to change an existing one,
press
until you reach
User Options
.
The keypad will emit a Half Beep when it switches to User Options. Pre-
existing options will illuminate.
Summary of Contents for Paradox Digiplex DGP-610
Page 1: ...Digiplex LED Keypads User s Manual...
Page 42: ...Digiplex LED Keypads 43 Figure 8 1 Delayed Fire Zone...
Page 57: ......
