Digiplex LED Keypads 13
If enabled by your installer, the One-Touch Buttons (section 3.6) or
a keyswitch (section 3.7) can also be used to arm the area.
3.3 S
TAY
A
RMING
Stay Arming will partially arm your system to permit you to remain in the
protected area. Based on your instructions, your installer will program specific
zones as Stay Zones. These zones will not arm when you Stay Arm. For
example, you can arm your doors and windows at home without arming the
motion detectors so you will be protected while you sleep. Only
User Access
Codes
with the
Stay and Instant Arm
option enabled can Stay Arm the system.
Also, see section 3.8 Auto-Arming for another everyday arming option.
3.3.1 Stay Arming with Delay
Stay Arming with Delay
functions like Stay Arming except the installer can
program armed zones with an
Entry Delay Timer
. If these zones are
accidently triggered, the timer will start to allow you time to disarm the area(s).
How do I regular arm the system?
1) Enter your
[
ACCESS
CODE
]
.
The keypad will emit a Confirmation Beep. The [
ACCESS
] Symbol will flash.
2) Press the
button.
If you have access to more than one area, press the Number Button
representing the area you want to arm or
[0]
for all assigned areas.
After the Confirmation Beep, the Exit Delay Timer will begin.
Summary of Contents for Paradox Digiplex DGP-610
Page 1: ...Digiplex LED Keypads User s Manual...
Page 42: ...Digiplex LED Keypads 43 Figure 8 1 Delayed Fire Zone...
Page 57: ......
