6
Reference & Installation Manual
Adding Outputs
1. From the “Output Profile” menu,
press [
OK
].
2. Select which output you wish to
add, modify or delete by pressing
[
NEXT
] and then [
OK
] when the
desired output number appears.
3. Select what type of output you
wish to add. Press [
YES
] for a
wireless output, or [
NO
] for a
hardwired output. For hardwired,
follow the menus to configure the
output.
4. If you are adding a wireless
output, press the tamper switch
on the transmitter you wish to
assign to the selected zone.
When you complete an output programming option, you will be
given the choice to configure another output. If you do not
choose to program another output, you will be brought back to
the “Output Profile” menu.
Deleting Outputs
1. From the “Output Profile” menu,
press [
OK
].
2. Select which output you wish to
delete by pressing [
NEXT
] and
then [
OK
] when the desired output
number appears.
3. Press [
YES
].
4. Press [
YES
]. To delete another
output press [
YES
] and then
repeat steps 2 to 4.
When you are done the next menu
option will appear. Press
[
NEXT
]
until
you see the “System Test” menu or
press the
[5]
key to immediately access the “System Test” menu.
Summary of Contents for MG-6130
Page 2: ......
