Digiplex Liberator 25
For installations using LED Keypads:
Completing the
Programming Guide
(see section 6.0 of this manual) before
beginning Button Programming is suggested.
From Step 5 in Figure 3-1, page 8:
1) Enter a section from
[501]
to
[516]
depending on the remote control you want to
program. For example, program the buttons for the remote control assigned in
section
[301]
in section
[501]
.
2) In each section there are eight digits available to program. Each digit represents a
button or a combination of buttons. Enter a hexadecimal value (0 to F) of the option
you want from Table A (page 22). After every second digit programmed, the
keypad will emit beeps.
First digit:
enter the choice for Button A
Second digit:
enter the choice for Button B
(
BEEP
-
BEEP
-
BEEP
)
Third digit*:
enter the choice for Button C
Fourth digit*:
enter the choice for Button D
(
BEEP
-
BEEP
-
BEEP
)
Fifth digit:
enter the choice for Buttons A+B
Sixth digit*:
enter the choice for Buttons C+D
(
BEEP
-
BEEP
-
BEEP
)
Seventh digit*: enter the choice for Buttons A+C
Eighth digit*:
enter the choice for Buttons B+D
(
BEEP
-
BEEP
-
BEEP
-
BEEP
-
BEEP
)
Confirmation Beep
*Four-button remote control not currently available. Therefore, the third,
fourth, and sixth to eighth digits are for future use.
I319EI01.fm Page 25 Wednesday, September 29, 1999 10:56 AM
Summary of Contents for Digiplex Liberator DGP-319
