22 Reference & Installation Manual
5.6 PGM ACTIVATION EVENT
S
ECTIONS
[009]
TO
[012]
The PGM Activation Event determines which event will activate the
keypad's on-board PGM output. The
EVENT
GROUP
specifies the
event, the
FEATURE
GROUP
identifies the source, and the
START
# and
END
# sets the range within the Feature Group. Use the PGM
Programming Table in the Digiplex/DigiplexNE Modules’
Programming Guide to program the keypad’s PGM Activation Event.
Enter the sections that correspond to the
EVENT
GROUP
,
FEATURE
GROUP
,
START
# and
END
# of the PGM and enter the required data.
5.7 PGM DEACTIVATION EVENT
S
ECTIONS
[013]
TO
[016]
If the PGM Deactivation Option (section 5.2 on page 20) is set to
follow the PGM Deactivation event, the PGM will return to its normal
state when the event programmed in sections [013] to [016] occurs.
The
EVENT
GROUP
specifies the event, the
FEATURE
GROUP
identifies
the source, and the
START
# and
END
# sets the range within the
Feature Group. Use the PGM Programming Table in the Digiplex/
DigiplexNE Modules’ Programming Guide to program the keypad’s
PGM Activation Event.
Enter the sections that correspond to the
EVENT
GROUP
,
FEATURE
GROUP
,
START
# and
END
# of the PGM and enter the required data.
EVENT
GROUP
FEATURE
GROUP
START
#
END
#
PGM
[009]
[010]
[011]
[012]
EVENT
GROUP
FEATURE
GROUP
START
#
END
#
PGM
[013]
[014]
[015]
[016]
Summary of Contents for DGP2-641
