WD-42 Operator Manual
Kitchen Island Preparation
•
7
Kitchen Island Preparation
Planning Considerations
Materials
: All kitchen islands must be constructed using only non-combustible materials. If any combustible
materials are used, an insulated jacket must be added between the appliance and the island.
Airflow
: Proper airflow MUST be maintained for the appliance to perform as it was designed. If airflow is
blocked, overheating will result.
Building permit:
Check with city and fire department for local building codes. A permit may be required for a
custom-built kitchen island.
Custom Built Island Cut-outs
Ensure any island cut-out opening is no larger than the outside frame of the appliance being installed. The
appliance should rest on the lip of the frame.
The appliance must be installed in a non-combustible enclosure only.
The determination of whether a location is combustible or non-
combustible construction is made by the local fire marshal, building
inspector, or the local safety authority having jurisdiction.
To prevent overheating, do not obstruct the air flow of this appliance.
Here are some other considerations:
•
Ensure your appliance is adequately vented during operation. Consult your local licensed
professional for adequacy requirements
•
Ensure your outdoor kitchen is constructed out of non-combustible materials
•
Please allow for a tolerance of +/- 1/8"; we recommend having your appliances in hand to measure
before making final cutouts in your custom-built kitchen island
Summary of Contents for WD-42
Page 1: ...WD 42 Warming Drawer Operator Manual...
Page 4: ...ii Contents WE 42 Operator Manual Limited Warranty 20 Warranty Claim Submission 21...
Page 13: ...WD 42 Operator Manual Appliance Assembly 11 Cutout Dimensions Figure 3 Cutout Dimensions...
Page 20: ...18 Parts Diagram WD 42 Operator Manual Parts Diagram...