Page 11 of 27
Issued: 2022-08-12
Rev. 2
4-B)
Install the main beams onto the end beams.
4-D)
Using the 3/8” hardware, lightly bolt and the main beams to the end beams. Don’t fully
tighten or torque these bolts until after the H-Frames are installed.
4-C)
Using the 1/2” hardware, lightly bolt the cross beam into place. These bolts require a washer
under both sides of the connection. Don’t fully tighten or torque these bolts until after the
H-Frames are installed.
