Paradise Datacom 4 RU Chassis, Operation Manual

Page: 34 / 130

34 201627 REV X 4 RU SSPA Chassis Operations Manual
Note: Changes in serial communication settings from the front panel are
effective immediately. Changes to these parameters from serial interface
require that the unit be reset in order to take effect. The units can be reset
either by cycling power to the unit or by issuing a reset command from the
front panel, options menu.
2.2.2.4 Interface
Toggles between RS232, RS485, IPNet (Ethernet) or SNMP communication.
2.2.2.5 IP Setup
Select between the following menu items: IP Info - to review all IP Net Settings (as
described in
Section 2.2.1.9
through
Section 2.2.1.11
); or any of the following to
adjust the existing settings: Local IP; Subnet Mask; Default Gateway; Lock IP and
Local Port.
2.2.2.6 More
This menu allows the user to set the Community String Selection (Set/Get) and assign
the Web Password. Use the Up/Down keys to browse through selected characters.
Press the up [
▲ ] and down [ ▼ ] arrow keys simultaneously to erase the selected char-
acter. Press the Left/ Right keys to navigate within the string. Maximum length is 20
characters. Erase all of the characters in the Web Page Password Protection window
to disable password protection.
The LockIP selection gives the user the ability to increase the security measure for the
IPNet protocol. The SSPA will answer a request which comes only from the assigned
IP address. Set this address value to 0.0.0.0 or 255.255.255.255 to disable this fea-
ture.