Paradise Datacom 4 RU Chassis, Operation Manual

Page: 17 / 130

4 RU SSPA Chassis Operations Manual 201627 REV X 17
2.1.2 Rear Panel Features
Figure 2-2
shows an illustration of the rear panel view of a standard AC input Rack
Mount chassis. The rear panel features the prime power connection, a removable
Monitor & Control Card Assembly, removable fan assemblies, and the RF input and
output ports.
2.1.2.1 AC Input Port (J10)
The prime power connector, J10, provides universal AC input by using auto-sensing
power supplies. The AC input can operate over a range of 90-265 VAC, at 47 to 63 Hz.
The power supply is also power factor corrected, enabling the unit to achieve a power
factor greater than 0.93. An IEC 6100-3300 (F) connector is used for SSPAs with 110V
input power. A connecting cable is included with the amplifier.
The highest output levels, >70 W @ Ku-Band and >140 W @ C-Band, should be
powered only from a 180-265 VAC source. This will keep AC line currents to safe
operating levels for the internal EMI filter and associated circuitry. An IEC 4798-9000
(F) connector is used for SSPAs with 220V input power. A mating connector is
included with the amplifier. The prime power vs RF output power is summarized in the
specifications in
Appendix E
.
Figure 2-2 - C-Band SSPA rear panel
RF OUT J2 J1
S/N: XXXX
MODEL: XXXXXXXXXXXX
P/N: LXXXXXX-X
J10
AC IN