Paradigm PW 600, Owner'S Manual

Page: 10 / 35

FEATURES & FUNCTIONS
Power Button ( ):
• Press to power on/off. If no signal is
received for 20 minutes, unit will be in
standby.
• Press to reboot (power cycle) or
Factory Reset your Paradigm product
(see page 16) .
Volume Up/Down Buttons ( / ):
• Press to increase the volume level.
Press to decrease the volume level.
• Press and hold either / to ramp the
volume level up or down.
Mute Button ( ):
• Press to mute the audio. The Mute
button ( ) will illuminate WHITE when
the mute function is active.
• The Mute Button ( ) also switches on/
off ARC ™ Settings
– To setup ARC ™ and to learn how it
corrects room deficiencies see page
15.
– To switch off ARC
™
settings: PRESS
and HOLD for 5 seconds. Upon
releasing the button, a “negative tone”
will sound verifying ARC
™ settings are
switched off.
– Repeat the process to switch on ARC
™
settings. You will hear a “positive tone”
when ARC
™ settings are switched on.
Input Button ( ):
• PRESS and RELEASE to toggle
between Wireless/Wired Network
Streaming Mode
AND Rear Input Mode.
• The Input button ( ) illuminates WHITE
when Wireless/Wired Network Streaming
Mode is enabled and BLUE when the
Rear Input Mode is enabled.
• Your Paradigm product has the following
rear input: 3.5 mm Analog Input (PW 800
and PW 600)
OR RCA Analog Input (PW
AMP).
• Wireless/Wired Network Streaming
Mode is the default input mode. If your
Paradigm product is set to Rear Input
Mode and music is streamed, by default
your Paradigm product will switch to
Wireless/Wired Network Streaming
Mode.
• Enable/disable Auto input Mode
(see page 16).
Wi-Fi Setup Button:
• Initiates Wi-Fi setup for both Wi-Fi
Protected Setup (WPS)
and Standard Wi-Fi Setup.
Stereo/Mono Setting Switch (L/S/R)
(PW 600 ONLY) :
• For stereo output from one PW 600
speaker, set the switch to the “S”
(Stereo) position. For a stereo pair, set
the switch to either “L” (Left) or “R”
(Right) depending on the position of your
speaker within a listening space. For
example: If your speaker is in the left
position within a listening space, set the
switch to the “L” (Left) position. Follow
app instructions for pairing with iOS/
Android apps.
Wi-Fi Indicator ( ):
The Wi-Fi Indicator ( ) tells you what your
Paradigm product is doing:
• Fast Blinking – Your Paradigm
product is booting up.
• Blinking – Your Paradigm product is
attempting to connect to a wireless
router.
• Slow Pulse – Setup Mode.
• Two Blinks > Pause – WPS Mode.
• Solid – Connected to router.
• Off – Connected to a router
using a wired connection.
8