manualshive.com logo in svg

Paradigm iDEA+, User Manual

Share
Download
Paradigm iDEA+ User Manual Download Page 9

Chapter 2 Knowing iDEA

+

 Docking Station 

  

2.1 LED Indicator 

 

The iDEA

+

 Docking Station’s LED indicator display information about the device’s status. 

 

Green 

iDEA

+

 Docking Station access Internet successfully 

Orange  Flashing when iDEA

+

 Docking Station cannot access Internet 

Red iDEA

+

 Docking Station is booting 

 

2.2 Ports 

 

The ports of the iDEA

+

 Docking Station contain WAN Ethernet port, Reset Button, USB data port and 

USB only for charging port. 

 

WAN 

Port for connecting to the cable or DSL modem through Ethernet cable 

Reset Reset 

iDEA

+

 Docking Station to factory default. Press this button for more than 5 secs

USB 

Connect USB HDD, Flash Drive, 3G USB card and Smartphone 

USB 

Charging 

Only for Charging iPad, iPhone and Smartphone 

 

2.3 Power ON/OFF 

 

The Power ON/OFF Button of iDEA

+

 Docking Station.   

 

 

iDEA

+

Docking Station

4

 

Summary of Contents for iDEA+






























































Reviews:

No comments

Brands by name

Popular brands

Load more brands