19
FIGURE 11
STEP 11
STEP 12
• Position two 3/8 X 1/2” SPACERS (2) inside the rear bracket of the TOP BOOM and slide one 3/8” THREAD SHAFT (9) through the
bracket. See FIGURE 11.
TOP BOOM
7
8 3/8” HEX NUT
6
9
8 3/8” HEX NUT
6
5
7
5
•
SECURELY
assemble two 2” PULLEYS (5) to the rear bracket on the TOP BOOM using one 3/8” THREADED SHAFT (9), two 3/8”
WASHERS, two 3/8” HEX NUTS (8), and two 3/8” LOCK NUTS (7) as shown in FIGURE 11.
2
DETAIL 12
FIGURE 12
SEE DETAIL 12
LEG
CABLE
LAT
CABLE
LEG
PRESS
CABLE
PRESS
CABLE
D-RING
KEYHOLE
CLEVIS
•
Run the LEG PRESS CABLE through the correct hole on the d-ring and attach one KEYHOLE CLEVIS to the end of the LEG PRESS
CABLE. See FIGURE 12 & DETAIL 12.
