background image

31

30

Para Systems, Inc. (Para Systems) warrants this equipment, when properly applied and
operated within specified conditions, against faulty materials or workmanship for a pe-
riod of three years from the date of purchase.  For equipment sites within the United
States and Canada, this warranty covers depot repair or replacement of defective equip-
ment at the discretion of Para Systems.  Depot repair will be from the nearest authorized
service center.  The customer pays for shipping the product to Para Systems.  Para
Systems pays ground freight to ship the product back to the customer.  Replacement
parts and warranty labor will be borne by Para Systems.  For equipment located outside
of the United States and Canada, Para Systems only covers faulty parts.  Para Systems
products that are depot repaired or replaced pursuant to this warranty shall only be
warranted for the unexpired portion of the warranty applying to the original product.  This
warranty applies only to the original purchaser who must have properly registered the
product within 10 days of purchase.

The warranty shall be void if (a) the equipment is damaged by the customer, is improp-
erly used, is subjected to an adverse operating environment, or is operated outside the
limits of its electrical specifications; (b) the equipment is repaired or modified by anyone
other than Para Systems or Para Systems approved personnel; or (c) has been used in
a manner contrary to the product’s User's Manual or other written instructions.

Any technical advice furnished before or after delivery in regard to use or application of
Para Systems’ equipment is furnished without charge and on the basis that it represents
Para Systems’ best judgment under the circumstances, but it is used at the recipient’s
sole risk.

EXCEPT AS PROVIDED HEREIN, PARA SYSTEMS MAKES NO WARRANTIES, EX-
PRESSED OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY AND FIT-
NESS FOR A PARTICULAR PURPOSE.  Some states do not permit limitation of implied
warranties; therefore, the aforesaid limitation(s) may not apply to the purchaser.

EXCEPT AS PROVIDED ABOVE, IN NO EVENT WILL PARA SYSTEMS BE LIABLE
FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES
ARISING OUT OF THE USE OF THIS PRODUCT, EVEN IF ADVISED OF THE POSSI-
BILITY OF SUCH DAMAGE.  Specifically, Para Systems is not liable for any costs, such
as; labor for on-site installation, on-site maintenance or on-site service, lost profits or
revenue, loss of equipment, loss of use of equipment, loss of software, loss of data, cost
of substitutes, claims by third parties, or otherwise.  The sole and exclusive remedy for
breach of any warranty, expressed or implied, concerning Para Systems’ products and
the only obligation of Para Systems hereunder, shall be depot repair or replacement of
defective equipment, components, or parts; or, at Para Systems’ option, refund of the
purchase price or substitution with an equivalent replacement product.  This warranty
gives you specific legal rights and you may also have other rights which vary from state
to state.

No employee, salesman, or agent of Para Systems is authorized to add to or vary the
terms of this warranty.

Chapter 9:  Limited Product Warranty

A1.

DECLARATION OF CONFORMITY

Application of Council Directive(s):  2014/35/EU, 2014/30/EU, cTUVus (for
UL1778)

Standard(s) to which Conformity is declared:  EN61000-3-2, EN61000-3-3,
EN62040-2, IEC61000-2-2 IEC61000-4-2, IEC61000-4-3, IEC61000-4-4,
IEC61000-4-5, IEC61000-4-6, IEC61000-4-8, IEEE C62.41 Category A1,
UL1778, CSA 22.2 no. 107.3-14 / R: 2014, FCC Class B

Manufacturer’s Name:  Para Systems, Inc.  (MINUTEMAN UPS)

Manufacturer’s Address:1455 LeMay Drive

Carrollton, Texas 75007  USA

Type of Equipment:  Uninterruptible Power Supplies (UPS)

Model No:   PRO750RT2U (Y), PRO1000RT2U (Y), PRO1500RT2U (Y),

PRO2000RT2U (Y)

I hereby declare that the equipment specified above conforms to the above
Directive(s).

Place: Carrollton, Texas, USA

 Date: January 2, 2018

Robert Calhoun
      (Name)

Manager Engineering
        (Position)

Year of Manufacture:   Beginning January 2018

Summary of Contents for Minuteman PRO-RT 2U Series



















Reviews: