2. SET A PAUSE AFTER A CERTAIN NUMBER OF FOLDS
You want to fold a certain number, and then stop so you can remove that number as a
set.
Remedy: Increase the time between each sheet.
a. Press the C button.
b. Press and hold the count button until a xxxmS appears. Press the button
repeatedly until the counter reads 5S (5 Seconds).
c. Press the C button
d. Press the counter button so that the number in the set you want shows (e.g.
100).
e. Press the C button
f. Press the Start button.
g. The machine will stop after it folds the number you set. Remove them. It will
start again after the period you set expires.
h. Stop when you have the number of sets you want.
Setting the Folding Speed
The 34m has 2 speed controls, one for feeding and the other for folding. The
feed
should always be slower than the
folding
.
The feed knob is on the top; the fold knob is on the bottom. We recommend that you
start at a slower speed and then move up.
Maintenance
Folding machines need to be cleaned on a regular basis. All paper is dusted with
powder that keeps the sheets separate, but also can build up on feed wheels and
rollers in folding machines. Once it does, the wheels and rollers cannot grip the paper.
To clean the machine, make sure that all paper bits are out of the paper path. A can
of compressed air is handy for this purpose.
Wipe the wheels and rollers with a cloth that has been moistened with rubbing alcohol
or rubber roller cleaner (available at office supply stores). Turn the rollers by hand to get
all of the surface.
Remove and inspect the feed trays to make sure there is nothing in the path of the
paper and that they are installed correctly.
If paper is not feeding well, check the plastic separator under the middle feed wheel.
Both the separator and the feed wheel wear over time and may have to be replaced.
If paper is not feeding properly, check the separator under the feed wheel, the setting
for the separator and the paper thickness setting and make any necessary adjustments.
Specifications
Page 2019
13
