background image

ACTIVE SYSTEM ARMS

ATS SYSTEM

1

2

ALL THESE OPTIONS ARE ORIENTATE. 
The position can vary  depending on the constitution of the pilot. Remembering that this acts as a roman 
scale, it is not the same a pilot who is 1.90 m and weighs 95kg, as a pilot who is 1.65m and weighs 95 kg.

Although the  recommended angle is 20o regarding the propeller to the ground. Also take 
in mind the subjective factor of the flight position, there are pilots who prefer a more upright 
position or  the contrary.

If the position is too upright you have to pay special attention when releasing the breaks while in flight , as there is a 
possibility that they can be aspired  by the propeller .

If the position is too inclined forwards, then we will have difficulty getting out of the harness when landing.

The active system arms connect the harness to the frame. Carabiners are located on the harness where the paraglider 
risers are attached. The active arm connections points on the active arms work on a scale from A-F. 

Before your first flight witf the PAP machine it is necessary to find your ideal static balance when seated in the harness in 
the normal flight position, wearing your flight suit and equipment. 

This is best achieved by suspending yourself & the machine from a static frame. Moving the attachment points on the 
active arms forwards and backwards equally (

A

B

C

D

E

 or 

F

), you can find the optimum tilting angle (20 degrees) off the 

propeller to the ground. For lighter pilots move the shackles backwards and for heavier pilot’s move forwards.

The Active Arms System which conect the harness to the frame, where the paraglider risers are attached.These arms have 6 
connection points, the function of these points are to have the option to find the ideal static balance when flying together with 
the ATS System.

These arms work as a roman scale with it’s different connection points, leaning forwards or backwards in function of the 
ATS system. it is necessary to find your ideal static balance, wearing your flight suit and equipment, This is best achieved 
by suspending yourself & the machine from a static frame, moving the attachment points on the active arms forwards or 
backwards (B,C,D,E,F,) to find the optimum tilting angle 20 degrees of the propellor to the ground. The lighter weight pilots will 
move the ATS backwards, and the heavier pilots forwards.

The ATS System is the result of some study work done in the beginning of the Winter of 2012, which had the objective of 
improving the engine torque effect. With this system the light and heavy pilots can now fly comfortably with more powerful 
engines, and therefore have more thrust. PSince the PAP paraengine units were first made in 1989 they have been 
characterized for its low hang point design. Nowadays this is a huge achievement due to the weight of the pilot and the engine 
power which is no longer directly proportional. Because of this difficulty many manufacturers who followed our steps with the 
low hang point have gone back to the high hang point system to improve the engine torque effect.

A B C D

E F

A = +/- 50 Kg. 
B = +/- 60 Kg. 
C = +/- 70 Kg. 
D = +/- 80 Kg. 
E = +/- 100 Kg.
F = + 140 kg.

With the ATS System we have achieved without changing the height of the attachment point, 
where the the paraglider risers are attached , reducing the anti torque effect and therefore 
ensuring a comfortable and precise flight. We could say that the ATS System works as a 
stabilizer as the rotation point is about 90mm higher ontop of the arms where the paragliders 
risers are attached, just underneath the carabiner of the glider. Preventing with this the 
horizontal and vertical movements.

Another advantage of the ATS System is to be able to slide this on the paraengine arm until 
finding the exact position for the flight, a approximate angle of 20 degrees from the propeller 
to the ground.

B = +/- 55 Kg. 
C = +/- 65 Kg. 
D = +/- 75 Kg. 
E = +/- 85 Kg.  
F = + 100 Kg.

REMEMBER THAT NOW THE BALANCING POINT IS THE TOP PART OF THE ATS WHERE 
THE PARAGLIDERS ATTACHMENT LOOP GOES THROUGH , SO MOVING THE SHACKLE 
HAS NO INFLUENCE IN YOUR POSITION DURING FLIGHT.

SISTEMA ATS

Summary of Contents for TINOX































Reviews:

Related manuals for TINOX