background image

ENGLISH

OPERATING AND MAINTENANCE MANUAL

12

Power On (Green light flashes slowly) 

Battery Low (Red light stays illuminated)

Battery charged 80% (Green light flashes rapidly)

Battery charged 100% (Green light stays illuminated) 

Battery Pack temperature is too hot or too cold (Red light flashes slowly)

Battery Pack malfunction (Red and Green lights stay illuminated)

THE LED LIGHT ON THE CHARGER 

1. 

Charger is plugged into a 100-240V a.c outlet only.

2. 

If the battery pack is too hot or too cold, the charger will not fast charge the battery pack and the red 

Indicator  light  is  "blinking".  When  the  battery  pack  temperature  returns  to  between  0°C(32°F)  and 

50°C(122°F), The charger will automatically begin charging.

3. 

If both red and green indicator lights are "ON" the battery pack either does not comply or is defective. 

Please contact your retailer.

4. 

Do not charge the battery pack in the rain, snow or high temperature environment.

5. 

Do not charge battery pack when environment temperature is below 0°C (32°F)or above 40°C(104°F)

6. 

While charge the cool battery pack (below 0°C) in the warm indoor, keep the battery pack in the room for 
one hour to warm up before starting the battery pack. 

7. 

Remove the plug after finishing the charge.

8. 

The charger should be cooled at least one hour after continue charging three times.

9. 

Do not use generator for charging the battery pack. 

WARNING

Summary of Contents for TOOLKIT





















Reviews: