panthera S3 Operating Instructions Manual Download Page 16 | Manualshive

Page: 16 / 28

panthera S3 Operating Instructions Manual Download Page 16

16

ar

t.nr

.bruk-S3-eng, Rev

. 2016-02

Panthera

AB reserves the right to make technical changes if required

TRANSPORTATION

Assembling and disassembling the wheelchair

(Fig. 20 and 21)

When transporting the wheelchair, in a car, for example, the backrest can be folded and

the rear wheel detached.

Lowering the backrest

, Fig. 19:

1) Release the side guards and armrests, if necessary, and pull them up vertically.

2) Remove the seat cushion if necessary.

3) Pull the wire (1) and lower the backrest.

Detaching the rear wheel

Fig. 20:

1) Push the quick release button (1).

2) Pull the wheel straight off.

Attaching the rear wheel

, Fig. 20:

1) Push the quick release button (1).

2) Insert the wheel onto the rear axle and then push it in as far as possible.

3) Check that the button has sprung out (1), confirming the quick release is in locked

position.

4) Pull the wheel outwards to ensure it is firmly attached.

Fig. 24

Fig. 25

Fig. 26

Fig. 20

Fig. 21

«
...
14
15
16
17
18
...
»

Summary of Contents for S3





























Reviews:

No comments